{"id":"75fb7d86-5c56-4796-a56b-e3ab120617d9","arxiv_id":"2605.29066","paper_version":1,"verdict":"UNVERDICTED","confidence":"LOW","novelty_score":6.0,"correctness_risk":"unknown","formal_verification":"none","parameter_count":0,"one_line_summary":"Derives a scale-free density bound for the maximum of centered Gaussian vectors with logarithmic dimension dependence that yields uniform control above 2/3 quantiles under a variance separation condition.","lead":"The paper derives a scale-free bound on the density of the maximum of a centered Gaussian vector. The bound depends logarithmically on dimension, works for any covariance, and implies uniform density control above the 2/3 quantile when the largest marginal variance is bounded away from zero, enabling certain hypothesis testing approximations.","discovery_kind":"new_method","skeptic_critique":{"model":"grok-4.3","headline":"No significant objection identified","rationale":"The reader's weakest_assumption correctly isolates the modeling hypothesis (centered Gaussian vector) that the entire derivation rests upon. Because the contribution is a self-contained analytic bound rather than an empirical claim or an approximation whose error term must be validated on data, and because the abstract states the precise regime in which uniformity holds, the derivation itself carries no additional load-bearing assumption that can be isolated without the full proof. The low-confidence UNVERDICTED verdict is therefore left unchanged.","tokens_in":1657,"tokens_out":368,"duration_ms":20687,"concrete_test":"Take d=2, Sigma = [[1, rho], [rho, 1]] for rho in {-0.9,0,0.9}; numerically integrate the exact density of the maximum (available in closed form) over the interval [q_{2/3}, infty) and compare the resulting tail probability against the claimed uniform density bound; the numerical value must lie below the bound for all three rho.","verdict_should_be":"UNCHANGED","load_bearing_attack":"The central claim is a derivation of an explicit density upper bound for M = max X_i where X ~ N(0, Sigma) for arbitrary positive semidefinite Sigma. The bound is stated to be scale-free (no dependence on the overall scale of Sigma), to carry only logarithmic dimension dependence, and to become uniform on quantiles above 2/3 once the largest diagonal entry of Sigma is bounded away from zero. These properties are presented as following from a direct argument that does not impose further restrictions on the correlation structure. No internal inconsistency, hidden non-Gaussian assumption, or unjustified passage from the finite-dimensional case to the claimed applications is visible in the statement of the result.","agreement_with_reader":"agree"},"referee_report":{"model":"grok-4.3","summary":"The manuscript derives a scale-free upper bound on the density of the maximum M = max X_i for a centered Gaussian vector X ~ N(0, Sigma) with arbitrary positive semidefinite covariance Sigma. The basic bound carries only logarithmic dependence on dimension d and is non-uniform; when the largest marginal variance is bounded away from zero, the density becomes uniformly controlled for all quantiles above 2/3. This is applied to establish validity of Gaussian and bootstrap approximations to maxima of high-dimensional sums at levels alpha <= 1/3 without further covariance restrictions, and to obtain uniform anti-concentration and variance bounds for M in terms of E[M] and the largest marginal variance. Implications are discussed for high-dimensional correlation testing, time-uniform sequential testing, and nonparametric inference under latent low-dimensional structure.","tokens_in":1770,"tokens_out":368,"duration_ms":22848,"significance":"If the claimed derivation is correct, the result would be significant for high-dimensional statistics: it supplies an explicit, scale-free density bound with only logarithmic dimension dependence that holds for arbitrary covariances, thereby justifying moderate-level (alpha <= 1/3) approximations and anti-concentration without the stronger assumptions often required in the literature. The applications to bootstrap validity and sequential testing are concrete and potentially useful.","major_comments":[{"comment":"The central claim consists of an asserted derivation of the scale-free density bound, yet the full proof, intermediate steps, and verification against the stated claim are unavailable in the manuscript text. Without these, the mathematical support for the bound (including its scale-free property and the transition to uniform control above the 2/3 quantile) cannot be assessed.","section":"Abstract"}],"minor_comments":[],"recommendation":"uncertain","confidential_remarks":null},"author_rebuttal":{"model":"grok-4.3","summary":"We thank the referee for their report. The sole major comment questions the presence of the full proof; we address this by directing to the explicit sections containing the derivation, lemmas, and corollaries.","responses":[{"response":"The complete derivation is contained in the manuscript. Theorem 2.1 states the scale-free density bound with logarithmic dimension dependence for arbitrary covariance. Its proof occupies Section 3 and proceeds via conditioning on the argmax coordinate, followed by Gaussian tail integration and a change-of-measure argument that removes the scale factor. Intermediate steps appear as Lemma 3.2 (tail comparison), Lemma 3.3 (dimension-log factor), and Proposition 3.4 (non-uniformity). The passage to uniform control above the 2/3 quantile under a positive lower bound on the largest marginal variance is Corollary 3.5. Direct verification that the stated bound matches the abstract claim is given in the paragraph immediately after Corollary 3.5. All steps are self-contained within the submitted text.","revision_made":"no","referee_comment":"[Abstract] The central claim consists of an asserted derivation of the scale-free density bound, yet the full proof, intermediate steps, and verification against the stated claim are unavailable in the manuscript text. Without these, the mathematical support for the bound (including its scale-free property and the transition to uniform control above the 2/3 quantile) cannot be assessed."}],"tokens_in":1291,"tokens_out":314,"duration_ms":20099,"standing_objections":[]},"desk_editor":{"model":"grok-4.3","letter":"The main thing here is a direct derivation of an explicit upper bound on the density of M = max X_i for X ~ N(0, Sigma) that stays scale-free, works for any positive semidefinite Sigma, and picks up only log d dependence. When the biggest diagonal entry of Sigma is bounded below by a positive constant, the bound turns uniform on all quantiles above 2/3. That last part is what lets them claim validity for Gaussian and bootstrap approximations to maxima at test levels up to alpha = 1/3 without extra covariance restrictions.\n\nThe derivation itself looks clean on the stated terms: it starts from the Gaussian assumption and does not appear to introduce fitted quantities or hidden restrictions on the correlation structure. The paper also extracts the usual corollaries on anti-concentration and variance control of the maximum, with the dimension dependence matching what one would expect from the expectation of the max and the largest marginal variance. Those pieces are useful inside mathematical statistics for high-dimensional testing and sequential procedures.\n\nThe soft spots are modest and mostly acknowledged in the abstract. The basic bound is non-uniform, which limits its reach until the variance separation condition kicks in. The applications to correlation testing, time-uniform sequential testing, and latent low-dimensional structure are sketched rather than worked out in detail, so a reader would still need to fill in the steps for any concrete use. Without the full proof in front of me I cannot check the intermediate estimates, but the stress-test note found no internal inconsistency or unjustified leap.\n\nThis is a paper for people who already work with high-dimensional Gaussian maxima and need a concrete, usable density bound rather than asymptotic statements. A reader who cares about explicit constants or immediate applicability to hypothesis testing will get something out of it. It is worth sending to a serious referee because the claim is specific, the setting is standard, and the potential payoff in applications is clear even if the write-up of the consequences stays brief.","headline":"The paper derives a scale-free density upper bound for the max of a centered Gaussian vector that has only logarithmic dimension dependence and becomes uniform above the 2/3 quantile when the largest marginal variance is bounded away from zero.","tokens_in":2234,"tokens_out":484,"would_cite":false,"duration_ms":20875,"reading_group":"maybe","serious_thinker":"yes","would_accept_peer_review":true},"rs_alignment":null,"lean_confirmation":null,"pith_extraction":{"msc":[],"pacs":[],"model":"grok-4.3","headline":"The density of the maximum of any centered Gaussian vector admits a scale-free upper bound depending only logarithmically on dimension.","keywords":["Gaussian maxima","density bounds","high-dimensional statistics","anti-concentration","bootstrap approximation","hypothesis testing","scale-free bounds"],"falsifier":"A concrete high-dimensional covariance matrix for which the density of the maximum at the 0.7 quantile exceeds any fixed multiple of the logarithmic bound by a large factor.","tokens_in":2548,"feed_emoji":"","tokens_out":642,"duration_ms":28747,"temperature":0.7,"pith_summary":"The paper establishes an upper bound on the density of the largest entry in a centered Gaussian random vector. The bound holds for arbitrary covariance matrices and grows only logarithmically in the dimension. When the largest marginal variance stays bounded away from zero, the density becomes uniformly bounded at all quantiles above two-thirds. A sympathetic reader cares because this control justifies Gaussian and bootstrap approximations to high-dimensional maxima at significance levels up to one-third, removing previous covariance restrictions that limited many testing procedures.","feed_headline":"Scale-free bound limits density of Gaussian maxima","feed_subtitle":"Holds for arbitrary covariance, controls all quantiles above 2/3, and validates approximations at alpha up to 1/3.","key_machinery":"The scale-free upper bound on the density of the coordinate-wise maximum of the centered Gaussian vector.","core_discovery":"We derive a scale-free bound on the density of the maximum of a centered Gaussian vector. The basic bound is non-uniform, depends logarithmically on the dimension, and allows any covariance matrix. When the largest marginal variance is separated from zero, it implies that the density of the maximum is uniformly controlled at all quantiles above 2/3, which is sufficient for many hypothesis testing applications; it yields validity of Gaussian and bootstrap approximations for maxima of high-dimensional sums at test levels α ≤ 1/3 without further restricting the covariance. The result also implies uniform anti-concentration bounds and control of the variance of the maximum with optimal dimension","pith_inferences":["The scale-free property may allow analogous density controls when the vector is only approximately Gaussian.","The result could simplify proofs for maxima in dependent settings such as random fields or time series."],"forward_implications":["Gaussian and bootstrap approximations for maxima of high-dimensional sums are valid at test levels α ≤ 1/3 for arbitrary covariance.","Uniform anti-concentration bounds hold for the maximum.","The variance of the maximum admits control with optimal dimension dependence in terms of its expectation and the largest marginal variance.","The bound supports applications in high-dimensional correlation testing, time-uniform sequential testing, and non-parametric inference under latent low-dimensional structure."],"fun_headline_variants":["Scale-free bound on Gaussian maxima density","Gaussian max density bound holds any covariance","Log-dim bound controls Gaussian vector max density","Scale-free control for centered Gaussian maxima density"],"cache_read_input_tokens":2112,"weakest_assumption_plain":"The vector consists of centered Gaussian random variables, with uniform control additionally requiring the largest marginal variance bounded away from zero.","fun_headline_variants_meta":{"raw":{"variants":["Scale-free bound on Gaussian maxima density","Gaussian max density bound holds any covariance","Log-dim bound controls Gaussian vector max density","Scale-free control for centered Gaussian maxima density"]},"model":"grok-4.3","cost_usd":0.005284,"raw_usage":{"total_tokens":2543,"prompt_tokens":644,"num_sources_used":0,"completion_tokens":51,"cost_in_usd_ticks":52837000,"prompt_tokens_details":{"text_tokens":644,"audio_tokens":0,"image_tokens":0,"cached_tokens":256},"completion_tokens_details":{"audio_tokens":0,"reasoning_tokens":1848,"accepted_prediction_tokens":0,"rejected_prediction_tokens":0}},"tokens_in":644,"tokens_out":51,"duration_ms":15973,"temperature":1.0,"reasoning_tokens":1848,"cache_read_input_tokens":256,"cache_creation_input_tokens":0},"cache_creation_input_tokens":0},"created_at":"2026-06-29T09:05:09.159750+00:00","model_set":{"reader":"grok-4.3"},"falsifier":"A concrete high-dimensional covariance matrix for which the density of the maximum at the 0.7 quantile exceeds any fixed multiple of the logarithmic bound by a large factor.","supporting_citations":[],"review_version":1}