REVIEW 2 cited by
Forward Instrumentation for ILC Detectors
Not yet reviewed by Pith; the record is open.
This paper has not been read by Pith yet. Machine review is queued; the pith claim, tier, and objections will appear here once it completes.
SPECIMEN: schema-true, not a live event
T0 review · schema-true
One-sentence machine reading of the paper's core claim.
pith:XXXXXXXX · record.json · timestamp
read the original abstract
Two special calorimeters are foreseen for the instrumentation of the very forward region of the ILC detector, a luminometer designed to measure the rate of low angle Bhabha scattering events with a precision better than 10-3 and a low polar angle calorimeter, adjacent to the beam-pipe. The latter will be hit by a large amount of beamstrahlung remnants. The amount and shape of these depositions will allow a fast luminosity estimate and the determination of beam parameters. The sensors of this calorimeter must be radiation hard. Both devices will improve the hermeticity of the detector in the search for new particles. Finely segmented and very compact calorimeters will match the requirements. Due to the high occupancy fast front-end electronics is needed. The design of the calorimeters developed and optimised with Monte Carlo simulations is presented. Sensors and readout electronics ASICs have been designed and prototypes are available. Results on the performance of these major components are summarised.
Forward citations
Cited by 2 Pith papers
-
Tracing Neutrino Non-Standard Interactions through Charged Lepton Collisions
Future lepton colliders could probe neutrino-electron non-standard interactions down to coupling strengths of about 0.02% to 0.7%, depending on the machine.
-
The ILD Detector: A Versatile Detector for an Electron-Positron Collider at Energies up to 1 TeV
The ILD concept paper presents a particle-flow-optimized detector design, its performance requirements, technology options, and readiness for both linear and circular electron-positron colliders up to 1 TeV.
Discussion (0). Continue with ORCID to comment.