Scaling 5G-TSN Bridges: Operating Regimes, Scheduling, and Time Synchronisation Under Heterogeneous Industrial Traffic

3GPP Release 16 enables a 5G system to operate as a transparent IEEE 802.1 TSN bridge, but its scalability under heterogeneous industrial workloads remains insufficiently characterised. This paper uses the nascTime framework on OMNeT++/Simu5G to evaluate how many TSN endpoints a single 5G NR cell can bridge before per-flow QoS degrades. We model closed-loop control, machine vision, bulk telemetry, and IEEE 802.1AS traffic over a four-bearer SDAP architec- ture, varying the number of endpoints from 1 to 40, MAC scheduler, radio bandwidth (10 MHz and 20 MHz), and channel model. Results show three operating regimes. Below saturation, non-DRR schedulers perform similarly; near saturation, QoS- aware PF reduces critical-flow P99 latency by up to two or- ders of magnitude relative to channel-aware and fairness-based schedulers; and under overload, only QoS-PF maintains near- complete delivery for the highest-priority traffic. Across the two evaluated bandwidths, the saturation threshold approximately doubles when bandwidth doubles. We also show that isolating IEEE 802.1AS/gPTP traffic on a dedicated high-priority radio bearer reduces clock-servo instability, although endpoints carry- ing lower-priority data still experience elevated synchronisation delay under saturation because of reduced MAC scheduling frequency. Finally, the evaluated sub-6 GHz, 30 kHz-SCS con- figuration exhibits an effective latency floor of approximately 2.25 ms, indicating that sub-3 ms TSN deadlines may require radio-configuration changes such as configured grants or higher numerology