pith. machine review for the scientific record. sign in

arxiv: 2605.00239 · v1 · submitted 2026-04-30 · ⚛️ physics.med-ph

Recognition: unknown

Resolution-Noise Characteristics of Common FDK Filter Kernels: A Practical Reference for Preclinical Cone-Beam Micro-CT

Authors on Pith no claims yet

Pith reviewed 2026-05-09 19:31 UTC · model grok-4.3

classification ⚛️ physics.med-ph
keywords FDK reconstructionmicro-CTfilter kernelsMTFnoise power spectrumcone-beam CTpreclinical imagingimage quality
0
0 comments X

The pith

Sixteen FDK filter configurations in micro-CT produce MTF10 values from 0.93 to 2.35 lp/mm and integrated noise from 75,670 to 13,259 HU squared.

A machine-rendered reading of the paper's core claim, the machinery that carries it, and where it could break.

The paper tests four common filter kernels at four cutoff frequencies in the FDK algorithm and reconstructs the same cone-beam data sixteen ways. It quantifies the resulting changes in spatial resolution through the modulation transfer function, noise through the noise power spectrum, and detectability through a non-prewhitening index, plus qualitative views of a mouse lung specimen. The measured ranges demonstrate that filter choice can alter the smallest reliably detectable object size by a factor of three at typical contrasts. A reader would use the data as a lookup reference when selecting reconstruction parameters instead of default settings that are rarely justified in published studies.

Core claim

Across the sixteen configurations of ramp, Shepp-Logan, cosine, and Hamming kernels at cutoffs of 1.0, 0.8, 0.6, and 0.379 times Nyquist, MTF10 ranges from 0.93 to 2.35 lp/mm, integrated NPS from 75,670 to 13,259 HU squared, and the Rose criterion crossing diameter from 2.86 to 0.93 mm at 500 HU contrast and from 7.74 to 3.62 mm at 100 HU. The note supplies these values together with example images as a concise visual and quantitative reference for choosing FDK filter parameters in preclinical cone-beam CT.

What carries the argument

The sixteen combinations of four filter kernels and four cutoff frequencies, assessed via MTF, NPS, and NPW d prime on identical data from one scanner and one mouse lung specimen.

If this is right

  • Filter selection can be matched to a target resolution or noise level using the tabulated MTF10 and NPS numbers.
  • The Rose criterion diameters supply practical estimates of the smallest detectable feature size at two common contrast levels.
  • Qualitative differences visible in the mouse lung reconstructions illustrate how the quantitative metrics translate to real specimen images.
  • The data set allows groups to avoid default filter settings and instead pick configurations that balance their specific imaging needs.

Where Pith is reading between the lines

These are editorial extensions of the paper, not claims the author makes directly.

  • The reference could encourage labs to report the exact kernel and cutoff used in every micro-CT study, improving reproducibility across publications.
  • Extending the same evaluation to additional scanners would test whether the observed ranges are geometry-dependent or broadly applicable.
  • Task-based metrics beyond NPW d prime could be added in follow-up work to refine filter choice for particular detection problems such as tumor or vessel visualization.

Load-bearing premise

Measurements performed on the GE eXplore CT 120 scanner and a single mouse lung specimen adequately represent the resolution-noise trade-offs needed across the full range of preclinical micro-CT applications and scanner geometries.

What would settle it

Reconstructing the identical raw projections on a different preclinical cone-beam micro-CT scanner, computing the new MTF10 and integrated NPS values for all sixteen configurations, and checking whether they fall outside the reported ranges would show whether the reference holds.

Figures

Figures reproduced from arXiv: 2605.00239 by Falk L Wiegmann, Nancy L Ford.

Figure 1
Figure 1. Figure 1: FDK reconstruction pipeline for short-scan cone-beam micro-CT. The ramp filter step (highlighted) is the [PITH_FULL_IMAGE:figures/full_fig_p003_1.png] view at source ↗
Figure 2
Figure 2. Figure 2: Image quality metrics for all sixteen filter configurations on the image quality phantom (short-scan, [PITH_FULL_IMAGE:figures/full_fig_p004_2.png] view at source ↗
Figure 3
Figure 3. Figure 3: Spatial resolution as a function of filter configuration. (a) MTF curves for all sixteen configurations, with [PITH_FULL_IMAGE:figures/full_fig_p005_3.png] view at source ↗
Figure 4
Figure 4. Figure 4: Mouse lung reconstructions (axial slice) for all sixteen filter configurations, displayed with identical [PITH_FULL_IMAGE:figures/full_fig_p006_4.png] view at source ↗
read the original abstract

The ramp filter kernel and cutoff frequency are fundamental parameters of the Feldkamp-Davis-Kress (FDK) algorithm that determine the resolution and noise characteristics of the reconstructed image. Despite their importance, systematic evaluations of their combined effect on task-based image quality in preclinical micro-CT are scarce, and many studies do not report the filter configuration used. We reconstruct identical data from a GE eXplore CT 120 scanner using four filter kernels (ramp, Shepp-Logan, cosine, Hamming) at four cutoff frequencies (1.0, 0.8, 0.6, and $0.379\times$ Nyquist, matched to the detector-to-voxel size ratio) and evaluate each of the sixteen configurations using the modulation transfer function (MTF), noise power spectrum (NPS), and non-prewhitening detectability index (NPW $d'$). Qualitative assessment is performed on a mouse lung specimen. Across the sixteen configurations, $\mathrm{MTF}_{10}$ ranges from 0.93 to 2.35 lp/mm, integrated NPS from 75,670 to 13,259 $\mathrm{HU}^2$, and the Rose criterion crossing diameter from 2.86 to 0.93 mm at $\Delta C = 500$ HU and from 7.74 to 3.62 mm at 100 HU. This note presents the data as a concise visual and quantitative reference for groups selecting FDK filter parameters for preclinical cone-beam CT.

Editorial analysis

A structured set of objections, weighed in public.

Desk editor's note, referee report, simulated authors' rebuttal, and a circularity audit. Tearing a paper down is the easy half of reading it; the pith above is the substance, this is the friction.

Referee Report

0 major / 3 minor

Summary. The manuscript evaluates sixteen FDK reconstruction configurations on identical data from a GE eXplore CT 120 preclinical scanner, using four filter kernels (ramp, Shepp-Logan, cosine, Hamming) at four cutoff frequencies (1.0, 0.8, 0.6, and 0.379×Nyquist). It reports the resulting ranges for MTF at 10% (0.93–2.35 lp/mm), integrated noise power spectrum (75,670–13,259 HU²), and Rose-criterion diameters (2.86–0.93 mm at ΔC=500 HU; 7.74–3.62 mm at 100 HU), together with qualitative images of a mouse lung specimen, positioning the work as a practical reference for filter selection in cone-beam micro-CT.

Significance. If the reported measurements hold, the paper supplies a directly measured, quantitative reference for a frequently under-documented aspect of preclinical micro-CT reconstruction. The empirical workflow using standard Fourier-domain metrics (MTF, NPS) and task-based detectability (NPW d′) on real scanner data is a clear strength, providing concrete numbers that groups can use without performing their own extensive parameter sweeps.

minor comments (3)
  1. Abstract and results: The integrated NPS range is presented from highest to lowest value. A table listing the exact MTF10, NPS, and d′ values for each of the 16 individual configurations would allow readers to identify the precise kernel/cutoff pair that meets their resolution-noise requirements.
  2. Methods: Additional detail on ROI selection, phantom used for MTF/NPS measurements, and the precise implementation of the 0.379×Nyquist cutoff (including how it was matched to detector-to-voxel geometry) would improve reproducibility of the reported numerical ranges.
  3. Discussion: A short statement clarifying that the results are specific to the GE eXplore CT 120 geometry and the tested specimen would prevent over-generalization while preserving the utility of the data as a reference for similar systems.

Simulated Author's Rebuttal

0 responses · 0 unresolved

We thank the referee for their positive review and recommendation to accept the manuscript. We are pleased that the systematic evaluation of the sixteen FDK filter configurations is recognized as supplying a useful quantitative reference for preclinical micro-CT reconstruction.

Circularity Check

0 steps flagged

No significant circularity; purely empirical reference data

full rationale

The paper performs standard FDK reconstructions on fixed scanner data (GE eXplore CT 120, mouse lung specimen) using four kernels at four cutoffs, then directly measures MTF10, integrated NPS, and NPW d' via established Fourier-domain methods. No derivations, predictions, fitted parameters renamed as outputs, or self-citation chains are present; the reported ranges (MTF10 0.93–2.35 lp/mm, NPS 75,670–13,259 HU², Rose diameters) are obtained by applying the filters and computing the metrics on the resulting images. The work is self-contained against external benchmarks and contains no load-bearing steps that reduce to inputs by construction.

Axiom & Free-Parameter Ledger

0 free parameters · 2 axioms · 0 invented entities

This is an empirical reference study that applies standard reconstruction and image-quality metrics to existing scanner data. No new free parameters are fitted, no new entities are postulated, and the work rests on conventional domain assumptions of CT reconstruction.

axioms (2)
  • domain assumption The FDK algorithm provides a valid reconstruction of cone-beam projections under the scanner geometry used.
    Invoked as the reconstruction method for all 16 configurations.
  • domain assumption MTF, NPS, and NPW d' are appropriate and sufficient metrics for assessing task-based image quality in preclinical micro-CT.
    Used to generate the reported resolution, noise, and detectability results.

pith-pipeline@v0.9.0 · 5580 in / 1875 out tokens · 48874 ms · 2026-05-09T19:31:03.249838+00:00 · methodology

discussion (0)

Sign in with ORCID, Apple, or X to comment. Anyone can read and Pith papers without signing in.

Reference graph

Works this paper leans on

23 extracted references · 19 canonical work pages · 2 internal anchors

  1. [1]

    L. A. Feldkamp, L. C. Davis, and J. W. Kress. Practical cone-beam algorithm.Journal of the Optical Society of America A, 1(6):612–619, 1984. doi: 10.1364/JOSAA.1.000612

  2. [2]

    Benchmarking Open-Source FDK Against Commercial and Iterative Reconstruction Methods for Preclinical Micro-CBCT

    Falk L. Wiegmann and Nancy L. Ford. Benchmarking open-source FDK against commercial and iterative recon- struction methods for preclinical micro-CBCT. arXiv:2604.23047 [physics.med-ph], 2026

  3. [3]

    G. N. Ramachandran and A. V . Lakshminarayanan. Three-dimensional reconstruction from radiographs and electron micrographs: application of convolutions instead of Fourier transforms.Proceedings of the National Academy of Sciences, 68(9):2236–2240, 1971. doi: 10.1073/pnas.68.9.2236

  4. [4]

    Kak and Malcolm Slaney.Principles of Computerized Tomographic Imaging

    Avinash C. Kak and Malcolm Slaney.Principles of Computerized Tomographic Imaging. IEEE Press, New York,

  5. [5]

    Shepp and Benjamin F

    Lawrence A. Shepp and Benjamin F. Logan. The Fourier reconstruction of a head section.IEEE Transactions on Nuclear Science, 21(3):21–43, 1974. doi: 10.1109/TNS.1974.6499235

  6. [6]

    Boedeker, Samuel Brady, Jia Fan, Shuai Leng, Kyle J

    Ehsan Samei, David Bakalyar, Kirsten L. Boedeker, Samuel Brady, Jia Fan, Shuai Leng, Kyle J. Myers, Lu- cretiu M. Popescu, Juan Carlos Ramirez Giraldo, Frank Ranallo, Justin Solomon, Jay Vaishnav, and Jia Wang. Performance evaluation of computed tomography systems: Summary of AAPM Task Group 233.Medical Physics, 46(11):e735–e756, 2019. doi: 10.1002/mp.13763

  7. [7]

    Ghani, Liqiang Ren, Molly Wong, Yuhua Li, Bin Zheng, Xiujiang John Rong, Kai Yang, and Hong Liu

    Muhammad U. Ghani, Liqiang Ren, Molly Wong, Yuhua Li, Bin Zheng, Xiujiang John Rong, Kai Yang, and Hong Liu. Noise power characteristics of a micro computed tomography system.Journal of Computer Assisted Tomography, 41(1):82–89, 2017. doi: 10.1097/RCT.0000000000000483

  8. [8]

    Effect of filtered back-projection filters to low-contrast object imaging in ultra-high-resolution (UHR) cone-beam computed tomography (CBCT).Sensors, 20(22):6416,

    Sunghoon Choi, Chang-Woo Seo, and Bo Kyung Cha. Effect of filtered back-projection filters to low-contrast object imaging in ultra-high-resolution (UHR) cone-beam computed tomography (CBCT).Sensors, 20(22):6416,

  9. [9]

    doi: 10.3390/s20226416

  10. [10]

    Human and model observer performance for lesion detection in breast cone beam CT images with the FDK reconstruction.PLOS ONE, 13(3):e0194408, 2018

    Minah Han, Byeongjoon Kim, and Jongduk Baek. Human and model observer performance for lesion detection in breast cone beam CT images with the FDK reconstruction.PLOS ONE, 13(3):e0194408, 2018. doi: 10.1371/ journal.pone.0194408

  11. [11]

    Optimizing the reconstruction filter in cone-beam CT to improve periodontal ligament space visualization: An in vitro study.Imaging Science in Dentistry, 47(3):199–207, 2017

    Yuuki Houno, Toshimitsu Hishikawa, Ken-ichi Gotoh, Munetaka Naitoh, Akio Mitani, Toshihide Noguchi, Ei- ichiro Ariji, and Yoshie Kodera. Optimizing the reconstruction filter in cone-beam CT to improve periodontal ligament space visualization: An in vitro study.Imaging Science in Dentistry, 47(3):199–207, 2017. doi: 10.5624/isd.2017.47.3.199

  12. [12]

    Lagerwerf, Willem Jan Palenstijn, Holger Kohr, and K

    Marinus J. Lagerwerf, Willem Jan Palenstijn, Holger Kohr, and K. Joost Batenburg. Automated FDK-filter selection for cone-beam CT in research environments.IEEE Transactions on Computational Imaging, 6:739– 748, 2020. doi: 10.1109/TCI.2020.2971136

  13. [13]

    Tward and Jeffrey H

    Daniel J. Tward and Jeffrey H. Siewerdsen. Cascaded systems analysis of the 3D noise transfer characteristics of flat-panel cone-beam CT.Medical Physics, 35(12):5510–5529, 2008. doi: 10.1118/1.3002414

  14. [14]

    Grace J. Gang, J. Webster Stayman, Wojciech Zbijewski, and Jeffrey H. Siewerdsen. Task-based detectability in CT image reconstruction by filtered backprojection and penalized likelihood estimation.Medical Physics, 41(8): 081902, 2014. doi: 10.1118/1.4883816

  15. [15]

    A systematic task-based image quality assess- ment of photon-counting and energy integrating CT as a function of reconstruction kernel and phantom size

    Mridul Bhattarai, Steve Bache, Ehsan Abadi, and Ehsan Samei. A systematic task-based image quality assess- ment of photon-counting and energy integrating CT as a function of reconstruction kernel and phantom size. Medical Physics, 51(2):1047–1060, 2024. doi: 10.1002/mp.16619

  16. [16]

    Nancy Lee Ford, Xi Ren, Luca Egoriti, Nolan Esplen, Stephanie Radel, Brandon Humphries, Hui-Wen Koay, Thomas Planche, Cornelia Hoehr, Alexander Gottberg, and Magdalena Bazalova-Carter. Respiratory-gated micro-computed tomography imaging to measure radiation-induced lung injuries in mice following ultra-high dose-rate and conventional dose-rate radiation t...

  17. [17]

    Dennis L. Parker. Optimal short scan convolution reconstruction for fan beam CT.Medical Physics, 9(2): 254–257, 1982. doi: 10.1118/1.595078

  18. [18]

    Visualising Parker Weighting in Short-Scan Cone-Beam Micro-CT: A Practical Reference

    Falk L. Wiegmann and Nancy L. Ford. Visualising Parker weighting in short-scan cone-beam micro-CT: A practical reference. arXiv:2604.23390 [physics.med-ph], 2026

  19. [19]

    Photography — electronic still picture imaging — resolution and spatial frequency responses, 2017

    International Organization for Standardization. Photography — electronic still picture imaging — resolution and spatial frequency responses, 2017

  20. [20]

    Radiation dose and image-quality assessment in computed tomography.Journal of the ICRU, 12(1), 2012

    International Commission on Radiation Units and Measurements. Radiation dose and image-quality assessment in computed tomography.Journal of the ICRU, 12(1), 2012. doi: 10.1093/jicru/ndt007

  21. [21]

    Plenum Press, New York, 1973

    Albert Rose.Vision: Human and Electronic. Plenum Press, New York, 1973. doi: 10.1007/978-1-4684-2037-1

  22. [22]

    Using in vivo respiratory-gated micro-computed tomography imaging to monitor pulmonary side effects in 10 MV FLASH and conventional radiotherapy

    Xi Ren, Luca Egoriti, Nolan Esplen, Stephanie Rädel, Brandon Humphries, Hui-Wen Koay, Thomas Planche, Cornelia Hoehr, Alexander Gottberg, Magdalena Bazalova-Carter, and Nancy Lee Ford. Using in vivo respiratory-gated micro-computed tomography imaging to monitor pulmonary side effects in 10 MV FLASH and conventional radiotherapy. InMedical Imaging 2023: Bi...

  23. [23]

    Avey, Monya Baker, William J

    Nathalie Percie du Sert, Viki Hurst, Amrita Ahluwalia, Sabina Alam, Marc T. Avey, Monya Baker, William J. Browne, Alejandra Clark, Innes C. Cuthill, Ulrich Dirnagl, Michael Emerson, Paul Garner, Stephen T. Holgate, David W. Howells, Natasha A. Karp, Stanley E. Lazic, Katie Lidster, Catriona J. MacCallum, Malcolm Macleod, Esther J. Pearl, Ole H. Petersen, ...